Swix Side edge file guide WC Pro
Artikelnummer:TA785
- In stock
Description
Swix World Cup file holder made entirely of stainless steel.
Purchase a file/stone and sharpen the steel edge like a pro.
This is how you manually sharpen your steel edges with a file and file holder.
Step 1. Remove rough damages from stones and similar from the steel edge with a coarse file.
Step 2. If you are going to "hang the edge," that is, grind an angle on the base edge, it should be done before you sharpen the steel edge.
Step 3. Sharpen the steel edge with a file/stone and file holder
Step 4. Remove burrs from the edge with a stone or a very fine file. Preferably a diamond stone or ceramic stone. Make a light pass along the entire edge.
Step 5. Dull the steel edges 5-10cm at both the tip and end of the ski. This makes the skis more stable to ride. Dull the edge with a file, stone, rubber stone, or fibertex.
We also have a separate page where we have more information about sharpening steel edges.
Read more about sharpening steel edges here
Frakt och leverans
Beställ före kl. 14.00 på en helgfri vardag så skickar vi din order samma dag. Leveransen tar normalt 1-2 vardagar efter att paketet har lämnat vårt lager.
Fri frakt över 499 kr - annars kostar frakten 49 kr.
Spara upp till 20 % på större köp
Ju mer du handlar, desto högre rabatt får du:
- 10 % rabatt på ordrar över 1 250 kr
- 15 % rabatt på ordrar över 2 500 kr
- 20 % rabatt på ordrar över 5 000 kr
Rabatten dras automatiskt i kassan - ingen kod behövs.