Classic needs both grip and glide
Under the middle of the foot there is a grip zone. In front of and behind it are the glide zones. Grip is created with skins, grip wax, or a patterned grip zone.
The Wax Room - beginner's guide
Different types of cross-country skis and how they are waxed
Skin skis, waxable classic skis and skate skis need to be maintained in different ways. Here you get a simple overview of what provides grip, which surfaces should be glide waxed, and which type of ski suits different skiers.
First: the difference between classic and skate
Cross-country skis work differently depending on skiing style. When you know where the ski should provide grip and where it should glide, waxing becomes much easier.
Skate needs glide over the entire ski
Skate skis have no grip zone. The push-off is created with the ski edge, and the entire base is treated as a glide surface.
The ski's camber determines how the zones work
When you stand on both skis, the grip zone should normally sit slightly above the snow. When you load one ski, it should be possible to press it down and get grip.
Quick comparison of the most common ski types
Here you can see what provides grip, which surfaces should be glide waxed, and which maintenance is most important.
Skin skis
An integrated skin strip in the grip zone provides grip when you load the ski.
- Grip
- The skin strip under the foot.
- Glide wax
- On the glide zones in front of and behind the skin strip.
- Maintenance
- Cleaning and impregnation with products intended for skin skis.
- Suitable for
- Those who want to ski classic with simple and reliable handling.
Waxable skis
Grip wax or klister in the kick zone is matched to the temperature and snow type.
- Grip
- Grip wax or klister in the marked kick zone.
- Glide wax
- On the glide zones in front of and behind the kick zone.
- Care
- Remove old grip wax, clean, and build a new even layer.
- Suitable for
- Those who want to fine-tune grip and glide to the day’s conditions.
Skate skis
The ski has no kick zone. Propulsion is created by pushing off with the edge.
- Grip
- No grip wax and no skin insert.
- Glide wax
- Over the entire base from tip to tail.
- Care
- Cleaning, glide waxing, and thorough brushing.
- Suitable for
- Those who ski skate in groomed tracks and want speed and direct response.
Skin skis - easy grip for classic skiing
Skin skis have a strip of synthetic fiber or mohair in the ski’s kick zone. The fibers provide grip during the kick and at the same time must release from the snow when the ski is unweighted.
Skin skis are usually the easiest choice for those who want to ski classic without choosing grip wax or klister before every outing. They work in many conditions, but they are not maintenance-free.
- The glide zones need glide wax just like other cross-country skis.
- The skin insert should be kept clean from dirt, klister residue, and contamination from the track.
- Impregnation reduces water absorption and the risk of icing in wet snow.
- Use products intended for skin skis. Regular wax cleaner can be too strong for the skin and adhesive.
Glide wax front and rear
Apply liquid or hot glide wax to the glide zones. Keep the wax away from the skin insert itself.
Clean the skin when needed
Use a skin cleaner when the fibers are visibly dirty or when grip and glide have deteriorated. Always follow the product instructions.
Impregnate for damp and variable conditions
A skin impregnation helps the fibers repel water and can reduce the risk of snow freezing onto them.
Waxable classic skis - the greatest ability to fine-tune grip
On traditional classic skis, you create the grip yourself. Hardwax is normally used in colder, finer snow, and klister when the snow is coarse, icy, transformed, or wet.
The grip wax is applied only in the grip zone under the foot. The length of the grip zone depends on the ski's camber, your weight, and how the ski has been fitted. That is why it is wise to have a ski shop mark out the zone.
- Hardwax is applied in several thin layers and corked smooth between the layers.
- Klister should also be applied thinly and evenly. A layer that is too thick can slow the ski down and collect dirt.
- The glide zones are waxed separately and should not get any grip wax on them.
- The choice between hardwax and klister is governed more by the snow structure than by air temperature alone.
Check and mark the grip zone
Start from a correctly fitted zone. An unnecessarily long grip zone can impair glide, and a zone that is too short can give poor grip.
Lightly roughen and apply a durable binder layer
If needed, lightly roughen the grip zone and apply a base binder that helps today's grip wax stay on longer.
Choose hardwax or klister based on the snow
Read our guide to different snow types and follow the temperature range on the relevant product.
Build thin rather than thick
Several thin, even layers are easier to control than one thick layer. Test the skis before applying more.
Skate skis - the entire base should glide
In skate skiing, you create the push-off by edging the ski and pushing off with the edge. Therefore, no grip wax and no skin strip are needed.
On skate skis, the entire base is treated as a glide zone. A liquid glide wax is a quick and easy solution, while hot waxing normally gives a more durable result and better care of the base.
- Clean the base when it is dirty and always brush in the ski's direction of travel.
- Choose glide wax based on temperature, snow type and how much work you want to put in.
- Scrape and brush away excess hot wax. The wax should work into the base, not sit on top as a thick layer.
- Structure and rilling become more important when you want to optimize glide for specific conditions.
Clean and brush
Remove dirt and old loose material so the new glide wax has a clean surface to work with.
Apply glide wax over the entire base
Use liquid glide wax for quick treatment, or heat in solid glide wax when you want better durability.
Scrape and brush thoroughly
After hot waxing, the groove and base should be scraped clean and then brushed until the structure is open and the surface feels even.
Which type of ski suits you?
The choice starts with how you want to ski. Then come your level of ambition, maintenance, and how much you want to be able to fine-tune the skis.
Choose skin skis for easy classic skiing
They are a good choice when you want to get out quickly, have consistent grip in many conditions, and avoid choosing grip wax before every outing.
Choose waxable skis for more control
They are suitable when you want to match the grip exactly to the day's conditions and are prepared to spend a little more time in the wax room.
Choose skate skis when you ski freestyle
Skate skis are built for skating, with a different camber and a different length than classic skis. They are not a substitute for a classic ski.
Common mistakes when starting to wax cross-country skis
Most problems can be avoided by keeping the grip zone, skin and glide zones separate.
- Glide wax on skin
- Keep regular glide wax away from the skin strip. Instead, use products specifically intended for skins.
- Grip wax too far forward and back
- Grip wax outside the fitted grip zone can slow the ski down and make it difficult to clean.
- Regular cleaner on skin
- Strong solvents can affect the skin and glue. Choose a cleaning product adapted for skins.
- No glide wax on skin skis
- The skin only creates the grip. The glide zones still need to be cleaned and waxed.
- More wax when grip is poor
- Poor grip can be due to the wrong zone, the wrong camber or the wrong type of wax. A thicker layer is not always the solution.
- Wax left on top of the base
- After hot waxing, the excess should be scraped and brushed off so that the ski's structure is exposed.
Frequently asked questions about cross-country skis and waxing
Yes. You do not need regular grip wax, but the glide zones should be glide waxed. The skin strip also needs to be cleaned as needed and can be impregnated to reduce water absorption and icing.
No, regular glide wax should not be applied to the skin strip. Use a skin-specific impregnation or booster product on the skin, and apply glide wax to the ski's glide zones.
Grip wax is used mainly in cold, dry and finer-grained snow. Klister is used when the snow is coarse, icy, transformed or wet. The snow type is at least as important as the temperature.
The kick zone is located under the foot around the binding, but the exact length depends on the ski's camber and your weight. It is a good idea to have a ski shop measure and mark the zone.
Yes. A skate ski has no kick zone, so the entire base is a glide surface. After hot waxing, the entire base should be scraped and brushed thoroughly.
For classic skiing, skin skis are often the easiest because they provide grip without you needing to choose grip wax or klister. The most important thing, however, is that the ski has the right length and camber for your weight and skiing.
The right products for your skis
Take care of grip, glide and skins the right way
See skin products for cleaning and impregnation or find glide wax for glide zones and skate skis. Contact us when you want help choosing.