Sand

Scrapers are used to remove excess wax. Keep them sharp for best results. Read more further down the page.

How scrapers work

Scrapers are the tools you use to remove excess wax after you've heated it into the base. A good scraper allows you to work efficiently and bring out the ski's structure before you start brushing and polishing.

Different types of scrapers

• Plastic scraper – standard for glide wax, used to scrape off paraffin after it has cooled. Usually 3–5 mm thick.
• Metal scraper – used to remove glue and hard dirt in the grip zone. Should not be used on the entire base.
• Groove scraper – smaller tool for cleaning edges and details around the steel edge and groove.

How to use a scraper

1. Let the wax cool completely after applying it with a waxing iron.
2. Use a sharp, flat plastic scraper and scrape in the ski's glide direction.
3. Hold the scraper at an even angle and work with long strokes.
4. Clean edges and possibly the groove with a smaller scraper.
5. Then brush out the structure with steel/brass and finish with nylon/horsehair.

Keep the scraper sharp

For the scraper to work effectively, it needs to be kept sharp. A dull scraper makes the work heavy and gives poorer results. Use a scraper sharpener to quickly restore a straight and sharp edge – it's an easy way to extend the tool's lifespan and achieve smoother scraping.

Tips for best results

• Ensure the scraper is always flat and sharp – sharpen it regularly.
• Use a plastic scraper for glide wax and a metal scraper only in the grip zone.
• Always brush after scraping to bring out the glide.

FAQ – Common questions about scrapers

Which scraper should I choose?
A 4 mm plastic scraper is sufficient for most. Feel free to complement with a metal scraper for glue and a small fine scraper for the edges.

How often should I sharpen the scraper?
As soon as it feels blunt or doesn't scrape evenly. With a scraper sharpener, it's quick to restore the sharpness.

Can I use a metal scraper on the entire base?
No, there's a risk of scratching the ski. Metal scraper is only for the grip zone and glue.

How do I know when I'm done scraping?
When you no longer get any wax residue and the structure is clearly visible, the base is ready for brushing.