All our products

Fantastically easy-to-apply glide walla. Without fluorine and with alcohol as a solvent, which makes it completely environmentally friendly. (Many ...

Toko Nordic Kick wax Yellow 0 / -2 TOKO Nordic GripWax Yellow is a kick wax for cross-country skis. The wax can be used as a base wax under other k...

Skigo XC Base Wax X-Strong - A necessary foundation for optimal performance! The Swedish national team's favorite for many years. Has an incredibl...

Start Kick wax Purple+1 / -3 For snow temperature around zero. This is quite unique as it covers all the way from +1 down to -4 degrees. Old snow ...

Start SG glider is sliding wall without fluoride and is an effective base glider. Used in racing as a base glider when the relative humidity is <...

Start SG glider is sliding wall without fluoride and is an effective base glider. Used in racing as a base glider when the relative humidity is <...

• Start Grundvalla BW – For basic preparation of new or freshly sharpened skis. Available either in small packages or in 900 gram service packs. 1...

XC Violet. +3 / -4 degrees. A very good durable base adhesive for most bows. Build on with Universal Red or regular can fixings. 60g

XC Universal. +3 / -1 degrees. Truly a universal adhesive that copes with these changing surfaces around zero with both fine-grained and coarse-gra...

XC Silver. +5 / -1 A glue that prevents freezing when, for example, you have a red glue or an orange glue and it starts to become a limit case that...

Skigo XC Kick wax Red. 0 / -2 degrees A wax that is used when it starts to get a bit tricky to wax near zero. Very good function just below the zer...

Skigo XC Kick wax Orange. +3 / -2 degrees A wax when it is the most difficult to wax. When it might be a little colder at higher altitudes with fre...

Skigo XC Kick wax Yellow. +5 / -1 degrees A kick wax that works best when it has been cold at night and becomes several degrees above freezing duri...

An adhesive package from SKIGO that contains both cleaning and preparation with a universal adhesive spray. A package that contains what you need t...

Base paste in spray form. (Also available in tube form which can last longer but is more difficult to apply) Cover the sliding surfaces of the skis...

Base stickers. (Also available in a simpler spray form that is easier to apply) Add a very, very thin layer and heat with a rolling iron. Then you ...

Start Special Klister – for below zero +2...-2°C. When herding with adhesive, you always start with a base adhesive at the bottom. Then add another...

START TAKES TWO RED 0 / -3 Starts Tjärvallor for fresh snow conditions. Suitable for exercisers in all snow conditions. For fine-grained fresh sno...

START TAR ZERO PURPLE +2 / -2 Starts Tjärvallor for fresh snow conditions. Suitable for exercisers in all snow conditions. For fine-grained fresh ...

Start Violett Klister – for damp, coarse grain and icy tracks Used as mixing adhesive in Start Wide adhesive . START'S DIFFERENT STICKERS: • Start...

Start Kick wax Yellow+3/+1 For older, coarse-grained snow. Old, coarse-grained snow is more aggressive and abrasive than fresh snow, ...

The base waxes give the wax an improved wear resistance. Start by roughing up the surface of the skis. 100 grit sandpaper is recommended. Then add ...

Start alpine glidvalla is developed for alpine skis and snowboards. 5°...-1°C (41°...30°F) 0...55% 110°C (230°F) 180g

Start All Temp Universal – universal sliding wall for all temperatures. 10°...-30°C (50°...-22°F) 0...50% 120°C (248°F) 180g