start

Start alpine glidvalla is developed for alpine skis and snowboards. -6°...-12°C (21°...10°F) 0...55% 130°C (266°F) 180g

Start alpine glidvalla is developed for alpine skis and snowboards. -8°...-20°C (18°...-4°F) 0...55% 140°C (284°F) 180g

Base stickers. (Also available in a simpler spray form that is easier to apply) Add a very, very thin layer and heat with a rolling iron. Then you ...

Base paste in spray form. (Also available in tube form which can last longer but is more difficult to apply) Cover the sliding surfaces of the skis...

The base waxes give the wax an improved wear resistance. Start by roughing up the surface of the skis. 100 grit sandpaper is recommended. Then add ...

Start Blue Klister – Icy tracks -4 …-15°C. Can be used on its own or as a mix-in adhesive Start Wide adhesive . START'S DIFFERENT STICKERS: • Start...

Start Kick wax Blue -2 / -6. For cold snow. Old snow is more aggressive and abrasive than new snow and requires waxes with better wear resistance....

Start Kick wax Green -5 / -10 Old snow is more aggressive and abrasive than new snow and it requires banks with better wear resistance. On the oth...

Start Kick wax Purple+1 / -3 For snow temperature around zero. This is quite unique as it covers all the way from +1 down to -4 degrees. Old snow ...

This well-tested tape barrier is easy to apply and is suitable for both competitive skaters and exercisers. In the best case, it lasts the whole se...

This well-tested tape barrier is easy to apply and is suitable for both competitive skaters and exercisers. In the best case, it lasts the whole se...

Cover jar for adhesive tape / Topping for Grip Tape If you have problems with the tape freezing, put a thin layer of this can on top. Does not need...

• Start Grundvalla BW – For basic preparation of new or freshly sharpened skis. Available either in small packages or in 900 gram service packs. 1...

Fantastically easy-to-apply glide walla. Without fluorine and with alcohol as a solvent, which makes it completely environmentally friendly. (Many ...

Fantastically easy-to-apply glide walla. Without fluorine and with alcohol as a solvent, which makes it completely environmentally friendly. (Many ...

Start Violett Klister – for damp, coarse grain and icy tracks Used as mixing adhesive in Start Wide adhesive . START'S DIFFERENT STICKERS: • Start...

Grundvala / primer that is specially developed to get the best results with the new fluorine-free sliding walls. This means that the wall remains l...

Start RG Race Fluoride-free ski slopes are currently among the best you can replace fluorine slopes with for the best glide. These ramps are thorou...

Graphite is used especially when it is cold new snow (soft snow) In these special conditions, this product is mixed into the ordinary vat. If, for ...

Start RG Race Fluoride-free ski slopes are currently among the best you can replace fluorine slopes with for the best glide. These ramps are thorou...

Molybdenum is used when there is coarse-grained, old or dirty snow. Ready for artificial snow! For best results in these special conditions, this p...

Start RG Race Fluoride-free ski slopes are currently among the best you can replace fluorine slopes with for the best glide. These ramps are thorou...

Start RG Race Fluoride-free ski slopes are currently among the best you can replace fluorine slopes with for the best glide. These ramps are thorou...

Grundvala / primer that is specially developed to get the best results with the new floating sliding walls. This means that the wall remains longer...