{"title":"Snowglide grinding machines and grinding stones ","description":"\u003cp\u003e\u003cstrong\u003eSnowglide stands for edge tuning at the absolute highest level.\u003c\/strong\u003e This French specialist brand combines well-engineered mechanics with CBN grinding stones for those who demand the most from their skis' steel edges. Here you will find our three electric side edge sharpeners - AF-W World Cup, AF-C and Rhombus - and the stones that let you tailor the work from coarse cutting to fine polishing.\u003c\/p\u003e\n\u003ch2\u003eRooted in alpine race service\u003c\/h2\u003e\n\u003cp\u003eSnowglide has been developing portable edge grinders since 2007 and works with several alpine national teams. Experience from ski racing shapes the range: controlled material removal, well-thought-out settings and the ability to choose the stone to match the conditions. For those who appreciate truly refined tools, this is equipment to build your edge tuning around.\u003c\/p\u003e\n\u003ch2\u003eWhich Snowglide grinder should you choose?\u003c\/h2\u003e\n\u003ch3\u003eAF-W World Cup - for maximum fine-tuning\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/snowglide-af-w\"\u003eAF-W World Cup\u003c\/a\u003e is our most advanced option. Stepless side edge angle adjustment from 86 to 90°, adjustable RPM and adjustable spring pressure give you great scope to tailor the grinding work. Choose AF-W when you want full control over the details of edge preparation.\u003c\/p\u003e\n\u003ch3\u003eAF-C - robust construction and fixed angle settings\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/snowglide-af-c\"\u003eAF-C\u003c\/a\u003e combines a CNC-machined aluminium housing with angle adjustment from 86 to 90° in 0.5° increments. A well-balanced choice for regular tuning in the race family or your own wax room. It uses the same 70 mm stones as the AF-W.\u003c\/p\u003e\n\u003ch3\u003eRhombus - Snowglide for your own wax room\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/snowglide-rhombus\"\u003eRhombus\u003c\/a\u003e suits the ambitious home tuner and club racer. The machine is supported on the ski and uses gravity to create the grinding pressure. It has its own series of 50 mm stones and a clear selection of three grits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll three are supplied with a CBN grinding stone 46, 220 V power adapter, and carrying case or transport box.\u003c\/strong\u003e The machines in this category work on the side of the steel edge. The base edge is prepared separately.\u003c\/p\u003e\n\u003ch2\u003eThe right grinding stone completes the system\u003c\/h2\u003e\n\u003cp\u003eFirst choose the stone series to match your machine, then the grit according to the work step and desired finish:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/snowglide-af-cbn-slipsten-70-mm\"\u003e\u003cstrong\u003eAF CBN grinding stones 70 mm\u003c\/strong\u003e\u003c\/a\u003e for AF-W and AF-C. Nine grit options from L15 for ultra-fine polishing to L252 for coarse pre-grinding.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/snowglide-rhombus-cbn-slipsten-50-mm\"\u003e\u003cstrong\u003eRhombus CBN grinding stones 50 mm\u003c\/strong\u003e\u003c\/a\u003e: R46 for a fine finish, R91 as the standard option, and R151 for coarser work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWithin each series, lower numbers give a finer finish. According to Snowglide, the same number gives a finer result with Rhombus than with the AF machines. On the stone product pages, you will find help choosing the right complement to the stone already included.\u003c\/p\u003e\n\u003ch2\u003eAccessories, spare parts and service\u003c\/h2\u003e\n\u003cp\u003eSnowglide offers service and repair for its machines. Looking for measuring tools, extraction adapters, power adapters or other accessories and spare parts? Continue to \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner\"\u003ethe full Snowglide range\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLearn more in the Wax Room:\u003c\/strong\u003e read about \u003ca href=\"\/en\/pages\/slipa-stalkanter\"\u003esharpening steel edges\u003c\/a\u003e and choosing \u003ca href=\"\/en\/pages\/kantvinklar-for-alpinskidor-och-snowboard\"\u003eedge angles for alpine skis and snowboards\u003c\/a\u003e.\u003c\/p\u003e ","products":[{"product_id":"snowglide-af-w","title":"Snowglide AF-W World Cup side edge tuning machine for steel edges ","description":"\u003cp\u003e\u003cstrong\u003eSnowglide AF-W World Cup\u003c\/strong\u003e is the flagship among our electric side edge grinders from Snowglide. For those who see edge preparation as part of performance, it gives you control over side edge angle, grinding pressure and RPM. A precision tool for the service technician, racer and ski tuner who wants to fine-tune their work at the highest level.\u003c\/p\u003e\n\u003cp\u003eAF-W is developed for the precision that defines alpine race service. The separate adjustments let you adapt the machine to your way of working and the edge finish you are looking for. Together with the right CBN stone, you get a system with extensive scope for your own fine-tuning.\u003c\/p\u003e\n\u003ch2\u003eControl over the entire grinding process\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepless angle adjustment 86-90°:\u003c\/strong\u003e also choose angles between fixed half degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable spring pressure:\u003c\/strong\u003e the preload regulates the stone's pressure against the side edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable RPM:\u003c\/strong\u003e the brushless 24 V motor is controlled with a dial on the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour bearings against the base:\u003c\/strong\u003e the machine is supported on the ski and runs smoothly along the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic cover:\u003c\/strong\u003e provides easy access for stone changes and cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuild a system for your ski tuning\u003c\/h2\u003e\n\u003cp\u003eThe included CBN 46 stone is an all-round stone. AF-W uses \u003ca href=\"\/en\/products\/snowglide-af-cbn-slipsten-70-mm\"\u003eSnowglide AF stones with 70 mm diameter\u003c\/a\u003e, so you can add other grits when your tuning requires it. CBN stands for cubic boron nitride. The stones work on the side of the steel edge; the base edge is prepared separately.\u003c\/p\u003e\n\u003cp\u003eOur recommendation is to choose AF-W when the ability to fine-tune the work is an important part of the purchase. If you want to compare the three models, they are gathered among our \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner-och-slipstenar\"\u003eSnowglide grinding machines and grinding stones\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eThis is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnowglide AF-W World Cup grinder.\u003c\/li\u003e\n\u003cli\u003eCBN grinding stone 46, diameter 70 mm.\u003c\/li\u003e\n\u003cli\u003ePower adapter for 220 V mains connection, with 24 V DC to the machine.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant carrying case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eService and accessories\u003c\/h2\u003e\n\u003cp\u003eSnowglide offers service and repair of its machines. If you also want to check the edge angle, you can add the Snowglide AM-1 angle gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso read in Vallaboden:\u003c\/strong\u003e \u003ca href=\"\/en\/pages\/slipa-stalkanter\"\u003eGrinding steel edges\u003c\/a\u003e and \u003ca href=\"\/en\/pages\/kantvinklar-for-alpinskidor-och-snowboard\"\u003echoose the correct edge angle\u003c\/a\u003e. You will find more accessories and spare parts in \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner\"\u003ethe full Snowglide range\u003c\/a\u003e.\u003c\/p\u003e ","brand":"Snowglide","offers":[{"title":"Default Title","offer_id":59359404917084,"sku":"AF-W","price":37495.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/8181\/8201\/files\/img_product_afw4_1e4ab92f-3cd3-441d-b27c-880898dab56a.png?v=1791201893"},{"product_id":"snowglide-af-c","title":"Snowglide AF-C edge grinding machine for steel edges ","description":"\u003cp\u003e\u003cstrong\u003eSnowglide AF-C\u003c\/strong\u003e is an electric edge grinder for those who want to give the side edges a thoroughly finished result during recurring ski tuning. The CNC-machined aluminum housing, the anodized surface, and the fixed angle settings make it a solid precision tool for vallaboden. Here, the quality lies both in the construction and in the ability to work methodically with each pair of skis.\u003c\/p\u003e\n\u003cp\u003eWe recommend the AF-C for racing families, club skiers, and meticulous skiers who tune frequently. The compact machine uses the same wide selection of 70 mm CBN stones as the AF-W. This allows you to develop your tuning and choose the finish based on the skis, the snow conditions, and the skier’s preferences.\u003c\/p\u003e\n\u003ch2\u003eFixed angle settings for recurring tuning\u003c\/h2\u003e\n\u003cp\u003eThe side edge angle can be selected between 86 and 90° in fixed 0.5° increments. This makes it easy to choose the same setting for the next tune or switch between skis with different desired side edge angles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aluminum housing:\u003c\/strong\u003e a carefully manufactured construction with anodized finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed angle settings:\u003c\/strong\u003e 86–90° in 0.5° increments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable 70 mm stones:\u003c\/strong\u003e the same AF series used for the AF-W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e220 V mains connection:\u003c\/strong\u003e the included adapter supplies the machine with 12 V DC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoose the stone for the job\u003c\/h2\u003e\n\u003cp\u003eCBN 46 is included as an all-round stone. With \u003ca href=\"\/en\/products\/snowglide-af-cbn-slipsten-70-mm\"\u003eSnowglide AF CBN grinding stones 70 mm\u003c\/a\u003e, you can add finer or coarser options and build up a selection that suits your skis. CBN stands for cubic boron nitride. The machine and these stones grind the side edge; the base edge is a separate operation.\u003c\/p\u003e\n\u003cp\u003eChoose the AF-C when fixed angle settings suit your way of working and you want a solid tool for regular tuning. If you also want to be able to adjust speed and spring pressure, \u003ca href=\"\/en\/products\/snowglide-af-w\"\u003eAF-W World Cup\u003c\/a\u003e is the next step in the range.\u003c\/p\u003e\n\u003ch2\u003eThis is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnowglide AF-C edge grinder.\u003c\/li\u003e\n\u003cli\u003eCBN grinding stone 46, diameter 70 mm.\u003c\/li\u003e\n\u003cli\u003ePower adapter for 220 V mains connection, with 12 V DC to the machine.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant carrying case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSnowglide offers service and repair of the AF-C. The Snowglide AM-1 angle gauge is a useful complement when you want to check the edge angle. See the \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner\"\u003efull Snowglide range\u003c\/a\u003e for accessories and spare parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso read in Vallaboden:\u003c\/strong\u003e \u003ca href=\"\/en\/pages\/slipa-stalkanter\"\u003eSharpen steel edges\u003c\/a\u003e and \u003ca href=\"\/en\/pages\/kantvinklar-for-alpinskidor-och-snowboard\"\u003echoose the right edge angle\u003c\/a\u003e.\u003c\/p\u003e ","brand":"Snowglide","offers":[{"title":"Default Title","offer_id":59359405801820,"sku":"AF-C","price":24995.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/8181\/8201\/files\/img_product_af-c1_46a98176-0448-4735-b18a-bfa943dc130f.png?v=1791201575"},{"product_id":"snowglide-rhombus","title":"Snowglide Rhombus edge grinder for steel edges ","description":"\u003cp\u003e\u003cstrong\u003eSnowglide Rhombus\u003c\/strong\u003e brings Snowglide’s electric edge tuning into your own vallaboden. For the ambitious skier, the racing family and the club skier, it is a well-considered choice when the finish of the side edges should receive the same care as the rest of the equipment. You get a machine with gravity-controlled grinding pressure and its own series of CBN stones.\u003c\/p\u003e\n\u003cp\u003eRhombus has a housing made from shaped and machined Delrin and is supported directly on the ski. The grinding pressure is created by gravity, without a spring. This is one of the model’s most important features: the design helps the stone work with even pressure while you guide the machine along the edge.\u003c\/p\u003e\n\u003ch2\u003eSnowglide for your own vallaboden\u003c\/h2\u003e\n\u003cp\u003eRhombus is supplied with a fine CBN 46 stone. Start by getting to know it, then add to it based on which skis and snow conditions you are tuning for. With three grit options, it is easy to compare the alternatives and build up a stone selection that suits your skiing.\u003c\/p\u003e\n\u003cp\u003eIf you want to compare Rhombus with AF-C and AF-W, there is an overview among our \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner-och-slipstenar\"\u003eSnowglide grinding machines and grinding stones\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eDedicated stone series with 50 mm diameter\u003c\/h2\u003e\n\u003cp\u003eRhombus uses \u003ca href=\"\/en\/products\/snowglide-rhombus-cbn-slipsten-50-mm\"\u003eRhombus CBN grinding stones 50 mm\u003c\/a\u003e. CBN stands for cubic boron nitride. Choose the correct stone family when adding to the machine: the AF series 70 mm stones fit other models.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e46 - fine:\u003c\/strong\u003e the stone included when purchasing from Skidvalla.se.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91 - standard:\u003c\/strong\u003e an option for broader all-round work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e151 - coarse:\u003c\/strong\u003e for coarser material removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAccording to Snowglide, the same grit number gives a finer finish in Rhombus than in the brand’s other machines. Therefore, use the Rhombus series’ own classification when choosing a stone.\u003c\/p\u003e\n\u003ch2\u003eThis is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnowglide Rhombus grinding machine, supplier reference AF-R.\u003c\/li\u003e\n\u003cli\u003eCBN grinding stone 46, diameter 50 mm.\u003c\/li\u003e\n\u003cli\u003ePower adapter for 220 V mains connection.\u003c\/li\u003e\n\u003cli\u003eTransport case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRhombus is intended for the side of the steel edge. The base edge is prepared separately. Snowglide also offers service and repair of the model. To check the side edge angle, you can add the Snowglide AM-L angle gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso read in Vallaboden:\u003c\/strong\u003e \u003ca href=\"\/en\/pages\/slipa-stalkanter\"\u003eSharpen steel edges\u003c\/a\u003e and \u003ca href=\"\/en\/pages\/kantvinklar-for-alpinskidor-och-snowboard\"\u003echoose the correct edge angle\u003c\/a\u003e. More accessories and spare parts can be found in the \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner\"\u003efull Snowglide range\u003c\/a\u003e.\u003c\/p\u003e ","brand":"Snowglide","offers":[{"title":"Default Title","offer_id":59359406031196,"sku":"AF-R","price":10995.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/8181\/8201\/files\/img_product_rhombus1_ae55f7e9-7167-4055-a749-3011831ddd19.png?v=1791201530"},{"product_id":"snowglide-af-cbn-slipsten-70-mm","title":"Snowglide AF CBN grinding stone 70 mm ","description":"\u003cp\u003e\u003cstrong\u003eSnowglide AF CBN grinding stone 70 mm\u003c\/strong\u003e gives you the ability to tailor the side edge finish to the snow, the discipline, and the skier’s preferences. From coarse pre-grinding to the finest polishing, there are nine grit options to choose from.\u003c\/p\u003e\n\u003cp\u003eThe stones fit \u003ca href=\"\/en\/products\/snowglide-af-w\"\u003eSnowglide AF-W\u003c\/a\u003e, \u003ca href=\"\/en\/products\/snowglide-af-c\"\u003eAF-C\u003c\/a\u003e, AF-L and AF-1. All are intended for the side edge. A different stone series is used for the base edge on the AF-1.\u003c\/p\u003e\n\u003ch2\u003eCBN for precision grinding of steel\u003c\/h2\u003e\n\u003cp\u003eCBN stands for cubic boron nitride, a very hard abrasive material used for precision machining of hardened steel. Snowglide combines the abrasive with a specially adapted bonding agent. The range of grits means the same machine can be used for both more extensive edge work and a carefully selected final finish.\u003c\/p\u003e\n\u003ch2\u003eChoose grinding stone by work step\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLower numbers give a finer finish within the AF series.\u003c\/strong\u003e First choose based on how much work the edge needs, and then according to the surface finish you want to achieve. Snowglide’s recommended areas of use:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL15 - ultra-fine:\u003c\/strong\u003e Polishing and a very fine finish for speed events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL25 - very fine:\u003c\/strong\u003e For speed events and aggressive snow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL30 - very fine:\u003c\/strong\u003e A fine option for aggressive snow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL40 - fine:\u003c\/strong\u003e An option for giant slalom and a meticulous final finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL46 - all-round:\u003c\/strong\u003e The starting point for regular edge tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL64 - medium-coarse:\u003c\/strong\u003e For, among other things, slalom and icy conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL91 - coarse:\u003c\/strong\u003e A coarser surface finish for slalom on ice and indoor skiing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL125 - coarse:\u003c\/strong\u003e For coarser machining of the side edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL252 - very coarse:\u003c\/strong\u003e For pre-grinding when more material needs to be removed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich stones do you need?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStart with L46 for all-round tuning.\u003c\/strong\u003e It comes with the AF-W and AF-C from Skidvalla.se. Add L40 if you want to work with a finer giant slalom finish, or L25\/L15 for even finer polishing.\u003c\/p\u003e\n\u003cp\u003eFor larger changes to the edge angle or more extensive edge work, L252 is a practical complement. Snowglide’s AF-C manual recommends grit 252 for that type of prep work. Then choose a stone for the desired final finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePractical tip:\u003c\/strong\u003e Make sure the sidewall is cleared back enough for the stone to reach the steel edge. In the AF-C manual, Snowglide also explains that new stones need to be broken in before the finish can be assessed. Follow the machine’s user manual for break-in and stone changes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOuter diameter: 70 mm.\u003c\/li\u003e\n\u003cli\u003eAbrasive: CBN, cubic boron nitride.\u003c\/li\u003e\n\u003cli\u003eCompatibility: AF-W, AF-C, AF-L and AF-1 for side edge grinding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso read in Vallaboden:\u003c\/strong\u003e \u003ca href=\"\/en\/pages\/slipa-stalkanter\"\u003eGrinding steel edges\u003c\/a\u003e and \u003ca href=\"\/en\/pages\/kantvinklar-for-alpinskidor-och-snowboard\"\u003eedge angles for alpine skis and snowboards\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner-och-slipstenar\"\u003eSnowglide’s grinding machines and grinding stones\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner\"\u003ethe full Snowglide range with accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e ","brand":"Snowglide","offers":[{"title":"15","offer_id":59359409307996,"sku":"L15","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"25","offer_id":59359409340764,"sku":"L25","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"30","offer_id":59359409373532,"sku":"L30","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"40","offer_id":59359409406300,"sku":"L40","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"46","offer_id":59359409439068,"sku":"L46","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"64","offer_id":59359409471836,"sku":"L64","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"91","offer_id":59359409504604,"sku":"L91","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"125","offer_id":59359409537372,"sku":"L125","price":2795.0,"currency_code":"SEK","in_stock":true},{"title":"252","offer_id":59359409570140,"sku":"L252","price":2795.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/8181\/8201\/files\/img_product_meuleaf1_3aab9097-3368-47da-9563-367b285eabec.png?v=1791201845"},{"product_id":"snowglide-rhombus-cbn-slipsten-50-mm","title":"Snowglide Rhombus CBN grinding stone 50 mm ","description":"\u003cp\u003e\u003cstrong\u003eSnowglide Rhombus CBN grinding stone 50 mm\u003c\/strong\u003e lets you choose the side edge finish according to the conditions and your skiing. The three grit options give Rhombus a wide range of use, from fine preparation for speed and aggressive snow to coarser edge work ahead of slalom on ice.\u003c\/p\u003e\n\u003cp\u003eThis is Snowglide's dedicated stone series for the \u003ca href=\"\/en\/products\/snowglide-rhombus\"\u003eRhombus tuning machine\u003c\/a\u003e, with a 50 mm outer diameter and a lightweight polymer body. CBN stands for cubic boron nitride, a very hard abrasive that is also used for industrial precision grinding of hardened steel.\u003c\/p\u003e\n\u003ch2\u003eThree grit options for different needs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eR46 - fine:\u003c\/strong\u003e For a fine side edge finish. Snowglide recommends it, among other things, for speed events as well as man-made snow and aggressive snow. R46 is included with the Rhombus from Skidvalla.se.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR91 - standard:\u003c\/strong\u003e The broad all-round option in the Rhombus series. Snowglide highlights it for, among other things, giant slalom and varied use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR151 - coarse:\u003c\/strong\u003e For coarser machining and a coarser surface finish. Recommended by Snowglide for slalom on ice, indoor skiing, and pre-processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich stone should you add?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStart from what you want to change compared with the included R46.\u003c\/strong\u003e If you want a standard option for broader use, R91 is a natural next choice. If you need to be able to do coarser edge work, R151 is the complement.\u003c\/p\u003e\n\u003ch2\u003eCompare within the correct stone series\u003c\/h2\u003e\n\u003cp\u003eLower numbers give a finer finish within the Rhombus series. The same number, however, gives a finer finish on Rhombus than on Snowglide's other machines. That is why R46 is described as fine and R91 as standard. Choose according to the Rhombus guide above when adding to your machine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Snowglide Rhombus.\u003c\/li\u003e\n\u003cli\u003eWorking surface: side edge.\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 50 mm.\u003c\/li\u003e\n\u003cli\u003eAbrasive: CBN with adapted bond.\u003c\/li\u003e\n\u003cli\u003eVariants: R46, R91 and R151.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso read in Vallaboden:\u003c\/strong\u003e \u003ca href=\"\/en\/pages\/slipa-stalkanter\"\u003eSharpen steel edges\u003c\/a\u003e and \u003ca href=\"\/en\/pages\/kantvinklar-for-alpinskidor-och-snowboard\"\u003eedge angles for alpine skis and snowboards\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCompare \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner-och-slipstenar\"\u003eSnowglide's tuning machines and grinding stones\u003c\/a\u003e. You can find accessories and spare parts in the \u003ca href=\"\/en\/collections\/snowglide-slipmaskiner\"\u003efull Snowglide range\u003c\/a\u003e.\u003c\/p\u003e ","brand":"Snowglide","offers":[{"title":"46","offer_id":59359410454876,"sku":"R46","price":1495.0,"currency_code":"SEK","in_stock":true},{"title":"91","offer_id":59359410487644,"sku":"R91","price":1295.0,"currency_code":"SEK","in_stock":true},{"title":"151","offer_id":59359410520412,"sku":"R151","price":1295.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/8181\/8201\/files\/img_product_meulerhombus2_ed67fcd8-cefb-4b73-b157-49a723633f7d.png?v=1791201660"}],"url":"https:\/\/skidvalla.se\/en\/collections\/snowglide-grinding-machines-and-grinding-stones.oembed","provider":"skidvalla.se","version":"1.0","type":"link"}